The Government of the Republic of Cameroon has obtained from the World Bank, IDA Credit Agreement No. 72130 – CM to finance the cost of the LOCAL GOVERNANCE AND RESILIENT COMMUNITIES PROJECT (PROLOG) and intends to use a portion of the amount of this credit to make the authorized payments under the Contract for which this Request for Quotations is published.
The materials, equipment and services to be supplied under the Contract and financed by the Bank may have their origin in any country subject to Para. 9. At the Employer’s request, Contractors may be required to provide evidence of the origin of materials, equipment and services.
13. Tenders must NOT be accompanied by a bid guarantee issued by a first-class bank or a Non-banking establishment approved by the Ministry of Finance. However, guarantee retention of 10% of the total cost of the project is required.
IDA No. 72130– CM
Invited eligible Bidders may obtain further information from the SIGAMP Service of the BAFUT COUNCIL, during working hours from Monday to Friday between 9am and 3pm (GMT+1), or using Phone number : 677527274, PO BOX : 2082.
As soon as this invitation to Tender is published, the contract award documents (Tender’s file) will be made available to all bidders, either at their request from the SIGAMP service of the Bafut Council or the PROLOG PMU/RCU or via the internet link indicated in the invitation to Tender.
The Tender file is obtained free of charge at the Bafut Council SIGAMP Office.
Tenders must be submitted at the SIGAMP service of the Bafut Council, Cell Phone : +237 677527274 PO BOX : 2082 located Bamenda 1 Council , not later than 23/10/2025 at 10am, in seven (07) copies (including one (01) original and six (06) copies plus a USB key containing the digital PDF of the Administrative, Technical Files and the Financial bids in excel form) all in a sealed envelopes marked :
“Request for quotation No. 012//RFQ/BC/BCITB/MINDDEVEL/PROLOG/NWR/2025 OF 24/09/2025 FOR THE CONSTRUCTION OF MFONTA POTABLE WATER SUPPLY SCHEME BY PUMPING (SOLAR) IN THE BAFUT COUNCIL AREA, BAFUT SUB DIVISION, MEZAM DIVISION, NORTH WEST REGION
The execution period for the works is Three (03) calendar months ninety (90)days
The request for quotation will be opened by the Bafut Council Internal Tenders Board at the conference hall of the Bafut Council immediately after the deadline for the submission of this Quotations.
25. The request for quotation will be evaluated to ensure that the technical proposals are in compliance to the bids.
Verification that the Quotation Letter is properly completed, dated, and signed with the signatory's name and title;
Verification that the Unit Price Schedule and the Quantitative and Descriptive Quote are duly completed, dated, and signed;
Evaluation of the technical qualification of each admissible bid according to the bid evaluation grid; “Quotations will be evaluated lot-wise, taking into account discounts offered, if any, after considering all possible combination of lots”.
EVALUATION GRID
ADMINISTRATIVE BID
|
No. |
DESCRIPTION |
YES |
NO |
|
1 |
Undertaking by bidder, stamped, signed and dated in conformity with the model attached |
|
|
|
2 |
An attestation of non-bankruptcy issued by the court |
|
|
|
3 |
An attestation of fiscal conformity not more than three months old |
|
|
|
4 |
A Certificate of non-exclusion from public contracts |
|
|
|
5 |
CNPS Certificate not more than three months old |
|
|
|
6 |
An Attestation of bank account of the bidder issued by a bank or any other first order credit institution approved by the ministry in charge of finance |
|
|
|
7 |
An Attestation of tax payers registration |
|
|
|
8 |
An attestation of categorisation of the company |
|
|
|
9 |
A Site visit report signed by the bidder |
|
|
|
10 |
A grouping agreement signed by a notary if necessary (in case of a grouping) |
|
|
|
11 |
CCTP(Detailed Technical Specification or Technical Requirements Document) duly initialed on each page signed and dated on the last page by the enterprise |
|
|
All the administrative documents mentioned above must be less than three months old and be produced in originals or certified copies by the competent issuing authority.
TECHNICAL BID
|
N° |
Description |
NOTATION |
|
1 |
Presentation of the offer |
|
|
1.Documents spirally bound |
Yes/No |
|
|
2.Table of content page |
Yes/No |
|
|
3.Colour sheets separation |
Yes/No |
|
|
4.Page numbering |
Yes/No |
|
|
5.Neatness and clarity of documents |
Yes/No |
|
|
6.Presentation of documents in the order given in this Tender |
Yes/No |
|
|
2 |
References of the company in similar projects |
|
|
7.List of references for the last 5 years (dates) |
Yes/No |
|
|
8.Provided with at least 2 references of similar works completed (justified with the first and last page of the contract + acceptance report or certificate of completion) |
Yes/No |
|
|
3 |
Quality of personnels |
|
|
9.Works director ; At least a Bachelors degree in civil engineering or Rural engineering with at least five year of experience |
Yes/No |
|
|
10.Site foreman : At least a higher national diploma in civil engineering or Rural engineering with at least three year of experience |
Yes/No |
|
|
NB : for every « yes » obtained, it must be justified with: · CV signed by the candidate · Certified copy of the Technical Diploma/Certificate · An Attestation of Presentation of the Originals of the Technical Diploma/Certificate · An Attestation of Availability signed by the candidate · A Certified copy Identity Card. |
|
|
|
|
11. List of other personnel related to the task |
Yes/No |
|
4 |
Logistics (Equipments put aside for this project) |
|
|
12.Prove of ownership or rental of a pick-up |
Yes/No |
|
|
13.List of small equipment consistent with the tasks (produce photocopies of purchase invoices or rental invoices) |
Yes/No |
|
|
6 |
Methodology for carrying out the work |
|
|
14.Detailed technical note concerning the organization of the work |
Yes/No |
|
|
15.Description of socio-environmental protection rules (environmental protection, safety, health, and hygiene of site personnel) |
Yes/No |
|
|
16.Detailed work schedule with deadlines ≤ ninety days (90) days |
Yes/No |
|
|
7 |
17.Special technical clauses booklet, initialed on each page, dated and signed on the last page |
Yes/No |
|
8 |
18.Environmental and social clauses booklet, initialed on each page, dated and signed on the last page |
Yes/No |
|
|
19.Special administrative clauses booklet, initialed on each page, dated and signed on the last page |
Yes/No |
|
9 |
20.Site visit report (justified with photos and a thorough description of the site) |
Yes/No |
|
|
Total |
….. /15 |
NB: Only bidders with a total of at least 15 out of 20 yes points will be accepted for the next stage of the procedure.
Verification of arithmetic operations, multiplying unit prices by quantities where applicable and using the price in words to make any necessary corrections;
Preparation of a summary table of quotations based on the amounts corrected for any arithmetic errors, listed in ascending order.
For the purposes of evaluation and comparison, the currency(ies) of the quotations must be converted into the same currency. The currency to be used for comparison purposes to convert the proposed prices, expressed in various currencies, into the comparison currency at the selling exchange rate will be the following: CFA franc (XAF). The source of the exchange rate is the Bank of Central African States (BEAC). The exchange rate date is: twenty-eight (28) days before the date of submission of offers. (NB: If the reference currency is not quoted on this date, the exchange rate will be that of the last previous day quoted.).
. For technically compliant Quotations, the total evaluated prices, excluding provisional sums and any provision for contingencies, but including work in-house when their prices are established competitively, will then be compared to determine the lowest evaluated price(s).
[Select either of the two options below]
[Option 1- For Single Lot
28. The Contract will be awarded to the Contractor who meets the eligibility requirements in accordance with the RFQ, offers the lowest evaluated price/s, offers a technically compliant quotation, and guarantees completion of the Works by the specified date.
[Option 2- For Multiple Lots
28. The contracts will be awarded to the Contractor or Contractors meeting the eligibility requirements in accordance with the RFQ, offering a technically compliant quotation, guaranteeing completion of the Works by the specified date and offering the lowest evaluated price to the Employer for combined lots.”]
29. The Employer shall invite by the quickest means [e.g. e-mail] the successful Contractor/s for any discussion [this is expected to be virtual in light of the emergency situation] that may be needed to conclude the contract or otherwise for contract signature.
30. The Employer shall communicate by the quickest means with the other Contractors on its contract award decision. An unsuccessful Contractor may request clarifications as to why its quotation was not determined to be successful. The Employer will address this request within a reasonable time.
31. The Employer shall publish a contract award notice on its website with free access, if available, or in a newspaper of national circulation or UNDB online, within 15 (fifteen) days after award of contract. The information shall include the name of the successful Contractor, the Contract Price, the Contract duration, summary of its scope and the names of the Contractors and their quoted and evaluated prices.
On behalf of the Employer
14 Quotations will be valid for up to ninety (90) calendar days after the opening of the bids.
Price
15. The contractor must indicate the total price in the form entitled “Contractor Quotation”
16. The Contractor shall also fill in its rates and prices for all items of the Works described in the attached Bill of Quantities. Items against which no rate or price is entered by the Contractor will not be paid for by the Employer when executed and shall be deemed covered by the rates for other items and prices in the Bill of Quantities.
The rates and prices shall include all duties, taxes, and other levies payable by the Contractor under the Contract, as of the date 7 (seven) days prior to the deadline for submission of quotations
Option 2- Lump-Sum contracts
17. The Contractor shall also fill in a breakdown of its lump-sum price in the attached Activity Schedules.
The quoted price shall include all duties, taxes, and other levies payable by the Contractor under the Contract, as of the date 7 (seven) days prior to the deadline for submission of quotations.]
18. A Contractor expecting to incur expenditures in other currencies for inputs to the Works supplied from outside the Employer’s Country and wishing to be paid accordingly, shall indicate a foreign currency of its choice in addition to the local currency in: FCFA [insert the local currency].
19. The currency(ies) of the Quotation and the currency(ies) of payments shall be the same.
Tenders must be submitted at the SIGAMP service of the Bafut Council, Cell Phone : +237 677527274 PO BOX : 2082 located Bamenda 1 Council , not later than 23/10/2025 at 10am, in seven (07) copies (including one (01) original and six (06) copies plus a USB key containing the digital PDF of the Administrative, Technical Files and the Financial bids in excel form) all in a sealed envelopes marked :
“Request for quotation No. 012//RFQ/BC/BCITB/MINDDEVEL/PROLOG/NWR/2025 OF 24/09/2025 FOR THE CONSTRUCTION OF MFONTA POTABLE WATER SUPPLY SCHEME BY PUMPING (SOLAR) IN THE BAFUT COUNCIL AREA, BAFUT SUB DIVISION, MEZAM DIVISION, NORTH WEST REGION